Bioenno Li Deep Cycle Battery

PLEASE NOTE BATTERY PURCHASES MAY BE CHARGED AN ADDITIONAL SHIPPING CHARGE AFTER PURCHASE

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-12100AS is a state of the art 12V 100Ah battery. Putting out more power than a 12V 200Ah SLA at one fifth the weight and featuring Bioenno Power's unique integrated computer-control system, this battery offers you not only ABS hard-case ruggedness but also light weight and ease of use. Providing 2000+ charge cycles, 5-10+ years service life and 90% capacity discharge capability, this gives you more of everything making this the go to solution for any high power application. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet! This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 15A with Alligator Clips.

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-1280AS is a state-of-the-art 12V/80Ah battery featuring the current pinnacle of lithium technology available on the commercial market. Boasting both high energy density and high chemical/thermal stability, this Bioenno Power battery gives you all round performance providing power comparable to a 12V 160Ah rated SLA at less than half the weight! This is compatible with innumerable applications ranging from communications and surveillance to motors and solar systems and as with all Bioenno Power batteries, this battery includes an intelligent single-board micro computer control system known as a PCM (protection circuit module). Providing 5-10+ years of service at 2000+ charge cycles and up to 90% discharge of its rated capacity, this is the upgrade you need for your old SLA. It has an available 120VAC/240 VAC AC-to-DC charger that provides 15A with Alligator Clips. 

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-2450AS is a state of the art 24V 50Ah battery in a standard ABS size case. Designed primarily for loads requiring higher voltages to operate, this battery is ideally suited for applications such as larger motors where 12V is simply not enough, electric vehicles such as e-bikes and e-scooters, various robotics as well as in-field sensors and scientific equipment operating at higher voltages. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet! This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 10A, with Alligator Clips.

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-3650AS is a state of the art 36V 50Ah battery in a standard ABS size case. Designed primarily for loads requiring higher voltages to operate, this battery is ideally suited for applications such as larger motors where 12V is simply not enough, electric vehicles such as e-bikes and e-scooters, various robotics as well as in-field sensors and scientific equipment operating at higher voltages. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet! This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 10A, with Alligator Clips.

Please note that these battery should be charged using a LiFePO4 compatible charger, and not a charger for SLA batteries. 

Before discharge confirm terminal screws are wrench tightened to ensure proper contact is made!

PLEASE NOTE BATTERY PURCHASES MAY BE CHARGED AN ADDITIONAL SHIPPING CHARGE AFTER PURCHASE